Steam Generators - Steam-Whirl

Untitled Document

The WingIt™ Fastening System is the only fastening system that can install directly into the wall board - without an attachment to the structural support. The WingIt Fastening System surpasses the Americans with Disabilities Act (ADA) and all building code requiremrents.

The WingIt™ grab bar fastening system allows for the installation of grab bars in all commercial building wall substrates in ten to fifteen minutes. Drill two holes per standard grab bar and install the Wingits. There are no special tools or skills required.

Limit liability and allow for the proper installation of grab bars in every bath, exceeding all building codes for grab bars and safety railings!

Standard Grab Bar Wingit Shown

Grab Bar Wingit Fastener
available in Standard or Commercial Versions

ADA compliant
Installs within 15 minutes
Reduces costs by 70%
Liability reduction
Permanent "Blind" fastening
Waterproof - Incorporates 3M® VHB tape
100% American made from 304 (18/8) stainlesss steel
Eliminates the need to tear open and reconstruct walls
Exceeds building codes and goverment guidelines in all specified applications
Can be used in all framed walls

Installation Instructions - Click here

Commercial Installation Instructions (PDF) - Click here

WingIt™ Grab Bar Fastening System will exceed all Federal and Regional building code criteria in the following wall substrates:

5/8" drywall - painted or wallpapered	Multiple layers of drywall
5/8" or 1/2" drywall with tub surrounds	Plaster & Lathe
5/8" or 1/2" drywall with tile, marble and all stone	1/4" acrylic/fiberglass surrounds
5/8" or 1/2" drywall with any panel types	1/4" acrylic/tub surrounds
- fiberglass, faux marble, acrylic & plastics	All masonry type boards, with or w/out panel

Click here for more
information on the Grab Bars